6.To log for a specific interval of time, enter a two-digit number on the keypad. If you make a mistake entering a number, simply continue entering numbers until the correct value is displayed. Then press either F1 (SEC), F2 (MIN), or F3 (HRS) and the meter will automatically return to the measurement screen with new options available for the function keys.

7.To log for an indeterminate interval of time (until you tell the meter to stop or the memory is filled), press

F4 (CONT). The meter will automatically return to the measurement screen with new options available for the function keys.

12 . 1 % S T D

27 . 5 M A X C F 1 . 0 0

L O G M A X R M E N U Q U I T

F1 F2 F3 F4

8.Proceed to make measurements as normal. To initiate logging, press F1 (LOG). The meter will beep every time a data point is recorded.

12 . 1 % S T D

27 . 5 M A X C F 1 . 0 0

L O G E N D Q U I T

F1 F2 F3 F4

9.If a specific interval of time had been selected, the meter will automatically stop logging at the end of this interval. To stop logging earlier or when set to an indeterminate period of time, press F3 (END).

Chapter 8 Data Logging

53