10.A screen will appear requesting that you assign another two digit survey number to the new logging run. Use the numeric keypad to enter the two-digit number and then press F1 (OK) or ENTER. Again, make note of the number for later use. If you make a mistake, press F2 (CLR) to clear the screen and enter a new survey number. The meter will automatically return to the logged measurements screen.

N E W L O G G I N G R U N :

E N T E R N E W R E F N O . _ _

O K C L R M E N U Q U I T

F1 F2 F3 F4

To begin another logging run at a different rate or for a

different duration...

•Press F3 (MENU). Press the number 1 on the keypad to select DATA LOG from the First Menu Screen and proceed as previously described.

To end logging altogether and return to the standard

measurement screen...

•Press F4 (QUIT). To initiate logging again at a later point, use the menu system to select DATA LOG from the First Menu Screen.

Memory Capacity

To determine the remaining memory of the 8718B meter...

1.Access the menu system by pressing the function key that corresponds to the legend below MENU on the bottom line of the display.

2.Press the number 1 on the keypad to select DATA LOG from the First Menu Screen.

54

Operating the Meter