Note
The fixed and variable tone alarms operate independently of each other. The meter can be set to have both alarms off, either one of the alarms on, or both alarms on. If both alarms are turned on, the variable tone rate will vary with the field strength unless the measured field strength exceeds the fixed alarm threshold. The alarm will then sound a continuous tone.
Variable Tone Alarm
1.Use F3 (ON) or F4 (OFF) to change the status of the fixed alarm. The variable tone alarm constantly generates a series of tones that increase in frequency in direct proportion to field strength.
2.If you want to turn the fixed alarm on or off, do that next See Fixed Alarm on the previous page.
3.When you are satisfied with all the alarm settings, press ENTER and the meter will return to the measurement screen.
Chapter 10 Alarm Settings | 69 |