© National Instruments Corporation B-1 PCI Serial for Windows Me/9x
B

Uninstalling the

Hardware and Software

This appendix describes how to uninstall your serial hardware and the
NI-Serial software.

Uninstall the Hardware

Before you physically remove the serial hardware from your system, you
must remove the hardware information. To do so, complete the following
steps:
1. Select Start»Settings»Control Panel and double-click on the
System icon.
2. Select the Device Manager tab and click on the View devices by type
button.
3. Double-click on the Multi-function adapters icon.
4. From the Multi-function adapters list, select the National
Instruments interface that you want to uninstall, as shown in
Figure B-1.