National Instruments 320571-01 NI-DSP for LabVIEW for Windows Hardware and Software Configuration Form

NI-DSP for LabVIEW for WindowsHardware and Software Configuration Form

Record the settings and revisions of your hardware and software on the line located to the right of each item.

Complete this form each time you revise your software or hardware configuration, and use this form as a reference

for your current configuration. Completing this form accurately before contacting National Instruments for technical

support helps our applications engineers answer your questions more efficiently.

• DSP Hardware _________________________________________________

• Interrupt Level of Hardware _________________________________________________

• DMA Channels of Hardware _________________________________________________

• Base I/O Address of Hardware _________________________________________________

• NI-DSP Version _________________________________________________

• NI-DAQ Version _________________________________________________

• LabVIEW Version _________________________________________________

• Computer Make and Model _________________________________________________

• Computer Bus (XT/AT/ISA or EISA) _________________________________________________

• Microprocessor _________________________________________________

• Clock Frequency _________________________________________________

• Type of Video Board Installed _________________________________________________

• DOS Version _________________________________________________

• Programming Language _________________________________________________

• Programming Language Version _________________________________________________

• Other Boards in System _________________________________________________

• Base I/O Address of Other Boards _________________________________________________

• DMA Channels of Other Boards _________________________________________________

• Interrupt Level of Other Boards _________________________________________________