© National Instruments Corporation 3-1 6527 User Manual
3
Signal Connections
This chapter describes the pin arrangement, signal names, and signal
connections on your 6527 device.
Caution Connections that exceed any of the maximum ratings of input or output signals
on your 6527 device can damage the board and your computer. The description of each
signal in this chapter includes information about maximum input ratings. National
Instruments is not liable for any damages resulting from signal connections that exceed
these maximum ratings.

I/O Connector

The I/O connector for the 6527 device has 100 pins that you can connect to
50-pin accessories with the R1005050 cable or to 100-pin accessories with
the shielded SH100100-F cable. Figure 3-1 shows the pin assignments for
the 6527 device digital I/O connector. A signal description follows the
figures.