![](/images/backgrounds/145258/bg2.png)
2
DIN Rail MountingNOTE: Terminal bases must be connected to the network
module before applying power to the module. Do not connect
or disconnect terminal bases while power is applied to the
network module.
The FP-1000 has a simple rail clip for mounting reliably onto a
standard 35 mm DIN rail. To install the FP-1000 to the DIN rail,
follow these steps:
1. With a flat bladed screwdriver, open the rail clip to the
unlocked position as shown in Figure 1.
Figure 1. DIN Rail Clip
2. Hook the lip on the rear of the FP-1000 onto the top of a 35 mm
DIN rail and press the FP-1000 down onto the DIN rail as
shown in Figure 2.
Figure 2. Installing the Network Module onto a DIN Rail
3. Slide the FP-1000 to the desired position along the DIN rail.
After the FP-1000 is in position, lock it to the DIN rail by
pushing the rail clip in.
Rail Clip LockedRail Clip Unlocked
Press
DIN Rail
C
over
Local Bus
Connector
FP1000.fm Page 2 Thursday, July 31, 1997 8:49 AM