National Instruments FP-AI-112 operating instructions

FP-AI-112 and cFP-AI-112

These operating instructions describe how to install and use the

FP-AI-112 and cFP-AI-112 analog input modules (referred

toinclusively as the [c]FP-AI-112). For information about

configuring and accessing the [c]FP-AI-112 over a network, refer

to the user manual for the FieldPoint network module you are

using.

The [c]FP-AI-112 is a FieldPoint analog input module with the

following features:

• 16 analog voltage input channels

• Eight voltage input ranges: 0–1V, 0–5 V, 0–10V, ±60 mV,

±300mV, ±1V, ±5V, and ±10V

• 16-bit resolution

• 50 and 60 Hz filter settings

• 250Vrms CAT II continuous channel-to-ground isolation,

verified by 2,300Vrms,1 minute dielectric withstand test

• –40 to 70 °C operation

• Hot swappable

The FP-AI-112 mounts on a FieldPoint terminal base (FP-TB-x),

which provides operating power to the module. Installing the

FP-AI-112 onto a powered terminal base does not disrupt the

operation of the FieldPoint bank.