Chapter 2 Measurement & Automation Explorer (Windows)
© National Instruments Corporation 2-13 NI-488.2 User Manual
5. Rename the template as described in your application document ation.
6. Click the OK button twice to save your changes and exit.
Enable/Disable NI-488.2 DOS Support
Note NI-488.2 DOS support is not available on Windows Vista or later operating systems.
To enable or disable NI-488.2 DOS support, complete the following steps:
1. Start Measurement & Automation Explorer as described in the
Starting Measurement & Automation Explorer section.
2. Click on your GPIB interface and select Tools»NI-488.2»
DOS Support... from the Explorer menu.
3. Enable or disable DOS support in the NI-488.2 Settings dialog bo x
and click OK.
4. If you are prompted to do so, restart your system .
Access Additional Help and Resources
To access additional help and resources for the NI-488.2 software and your
GPIB hardware, refer to the following sections.

NI-488.2 Online Help

The NI-488.2 Help addresses questions you might have about NI-488.2 and
includes a function reference and troubleshooting information. You can
access the NI-488.2 online help as follows:
1. Start Measurement & Automation Explorer as described in the
Starting Measurement & Automation Explorer section.
2. Select Help»Help Topics»NI-488.2.

National Instruments GPIB Web Site

You can access the National Instruments GPIB Web site as follows:
1. Start Measurement & Automation Explorer as described in the
Starting Measurement & Automation Explorer section.
2. Select Help»National Instruments on the Web»GPIB Home Page.