National Instruments 3.x, NI-DAQ mx Base NI-DAQmx Base, Device Support, Operating System Support

NI-DAQmx Base Getting Started Guide 4 ni.com

NI-DAQmx Base is a driver that allows you to build applications that

run using a PDA device and Windows. NI-DAQmx Base includes the

following features:

• NI-DAQmx Base is a subset of the NI-DAQmx API and is similar in

functionality to NI-DAQmx.

• NI-DAQmx Base consists of a LabVIEW VI framework, which allows

you to customize the driver, if needed, when using LabVIEW.

• NI-DAQmx Base provides a high-level interface on the

LabVIEW 8.5 PDA Module for Windows Mobile,

Windows 2000/XP, and Windows Vista x86/x64.

Note If you are familiar with NI-DAQmx, refer to the NI-DAQmx Base 3.x Readme for

information about the differences between NI-DAQmx Base and NI-DAQmx.

NI-DAQmx Base 3.x supports the following devices under the

LabVIEW 8.5 PDA Module for Windows Mobile:

• NI CF-6004

• NI DAQCard-6024E

• NI DAQCard-6036E

• NI DAQCard-6062E

• NI USB-6008

• NI USB-6009

• NI USB-6501

Operating System, Application Software, Programming Language, and Device Support in NI-DAQmx Base 3.x

NI-DAQmx Base 3.x supports Windows 2000/XP and

Windows Vista x86/x64. The development environment for devices on

the LabVIEW 8.5 PDA Module for Windows Mobile is supported on

Windows 2000/XP and Windows Vista x86/x64.

Note Only one version of NI-DAQmx Base (such as NI-DAQmx Base 3.0) can be

installed on the same computer at the same time.