National Instruments NI 9215 Safety Standards

equipment, limited-energy parts of equipment, circuits powered by

regulated low-voltage sources, and electronics.

Caution Do not connect the NI 9215 with BNC to signals

or use for measurements within Measurement

CategoriesII, III, or IV.

Safety Standards

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement,

control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

Note For UL and other safety certifications, refer to the

product label, or visit ni.com/certification, search

by module number or product line, and click the

appropriate link in the Certification column.