NI PMA-1115 User Guide and Specifications 2 ni.com
• Video cabling to connect PMA-1115 to PXI controller
• Right-angle-to-vertical USB cable
•Driver CD
• Cable ties to organize power cabling
• Interlocking fastener to secure power adapter
MountingThe NI PMA-1115 includes a complete mounting kit for attachment to any
NI8 -Slot PXI chassis. This kit contains an adapter plate with provisions to
relocate the carrying handle as well as all required fasteners.
Complete the following instructions to install the NI PMA-1115.
1. Place chassis on its left side, as shown in Figure1. Remove and discard
the bottom feet and screws.
Figure 1. PXI 8-Slot Chassis On Left Side
2. Using a small flat-head screwdriver, carefully remove the handle
covers, as shown in Figure2.
1 Bottom feet
1