NI PXI/PCI-5114 Specifications 18 ni.com
Safety, Electromagnetic Compatibility, and CE ComplianceSpecification Valu e Comments
Safety The NI 5114 meets the requirements of the following
standards of safety for electrical equipment for measurement,
control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CAN/CSA-C22.2 No. 61010-1
—
For UL and other safety certifications, refer to the product label or visit ni.com/certification,
search by model number or product line, and click the appropriate link in the Certification column.
Emissions EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
—
Immunity EN 61326 EMC requirements; Minimum Immunity —
EMC/EMI CE, C-Tick, and FCC Part 15 (Class A) Compliant
Note: For EMC compliance, you must operate this device
with shielded cabling.
—
This product meets the essential requirements of applicable European Directives, as amended
for CE marking, as follows:
Low-Voltage
Directive
(safety)
73/23/EEC —
Electro-
magnetic
Compatibility
Directive
(EMC)
89/336/EEC —
For full EMC compliance, you must operate this device with shielded cabling. Refer to the
Declaration of Conformity (DoC) for this product for any additional regulatory compliance
information. To obtain the DoC for this product, visit ni.com/certification, search by model
number or product line, and click the appropriate link in the Certification column.
Waste
Electrical and
Electronic
Equipment
(WEEE)
EU Customers: At the end of their life cycle, all products must be sent to a
WEEE recycling center. For more information about WEEE recycling centers
and National Instruments WEEE initiatives, visit ni.com/environment/
weee.htm.