National Instruments NI TB-2706 Specifications

NI TB-2706 Installation Guide 6 ni.com

Specifications

These specifications are typical at 25 °C unless otherwise specified.

Caution The TB-2706 is not designed for input voltages greater than 42Vpk/60 VDC.

Refer to the documentation for your MSeries or PXI-6143 device to determine the input/output

specifications for your application.

Dimensions.................... ........................................10.7 × 8.6 × 2.0 cm (4.2 × 3.4 × 0.8 in.)

Dimension from face of PXI/PXIe card.................8.6 cm (3.4 in.)

Weight....................................................................289 g (10.2 oz)

I/O connector......................................................... One 68-position male VHDCI connector

Screw terminals

Number...................... ....................................70

Type................................................................Angled entry, 3.81 mm pitch

Wire gauge.............................................................26–16 AWG

Operating temperature................ ...........................0 to 55 °C

Storage temperature...............................................–20 to 70 °C

Relative humidity...................................................10 to 90% noncondensing

Pollution Degree (indoor use only)........................2

Altitude.................................................................. 2,000 m

This product is designed to meet the requirements of the following standards of safety for electrical

equipment for measurement, control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

Note For UL and other safety certifications, refer to the product label or visit ni.com/

certification, search by model number or product line, and click the appropriate link in the

Certification column.

This product is designed to meet the requirements of the following standards of EMC for electrical

equipment for measurement, control, and laboratory use:

• EN 61326 EMC requirements; Minimum Immunity

• EN 55011 Emissions; Group 1, Class A

• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A

Note For EMC compliance, operate this device according to product documentation.