National Instruments PCI/PXI-783xR, PXI-784xR, PXI-785xR

Getting Started with R Series Intelligent DAQ 4 ni.com

Figure 3. Installing an NI PXI-78xxR Device in a PXI Chassis

5. For the NI PCI-78xxR, secure the device mounting bracket to the computer back panel rail. For the

NI PXI-78xxR, secure the device front panel to the chassis front panel mounting rail using the

front-panel mounting screws.

6. For the NIPCI-78xxR, replace the computer cover, if applicable.

7. Plug in and power on the computer or PXI chassis.

To confirm that your device is recognized, complete the following additional steps:

1. Select Start»All Programs»National Instruments»Measurement & Automation to open

Measurement & Automation Explorer (MAX).

2. Expand Devices and Interfaces.

3. Verify that the device appears under Devices and Interfaces»RIO Devices.

1 PXI Chassis

2 PXI System Controller

3NI PXI-78xxR Device

4 Injector/Ejector Handle

5 Front-Panel Mounting Screws

6 Module Guides

7 Power Switch

PXI-1000B