© National Instruments Corporation A-1 PXI-8461 or PXI-8460 and NI-CAN for Windows 98/95
A

Uninstalling the Hardware

and Software

This appendix describes how to uninstall the PXI hardware and the
NI-CAN software from Windows 98/95.

Uninstalling the Hardware from Windows 98/95

Before physically removing the board from the computer, you must remove
the hardware information from the Windows Device Manager.
To remove the hardware information from Windows 98/95, complete the
following steps:
1. Select Start»Settings»Control Panel.
2. Double-click on the System icon.
3. In the System Properties dialog box that appears, select the
DeviceM anager tab.
4. Click on the View devices by type button at the top of the Device
Manager tab.
5. Double-click on the National Instruments CAN Interfaces icon.
6. To remove a board, select it from the list of boards under National
Instruments CAN Interfaces as shown in FigureA-1 and click on the
Remove button.