Appendix D Troubleshooting and CommonQuestions
© National Instruments Corporation D-7 PXI-8461 or PXI-8460 and NI-CAN for Windows 98/95
What do I do if my board is listed in the Windows Device Manager with
a circled X or exclamation point (!) overlaid on it?
Refer to the Problem Shown in Device Manager section of this appendix
for specific information about what might cause this problem. If you have
already completed the troubleshooting steps, contact National Instruments.
What do I do if the NI-CAN Diagnostic utility fails with an error?
Refer to the Diagnostic Utility Failures section of this appendix for specific
information about what might cause the NI-CAN Diagnostic utility to fail.
If you have already completed the troubleshooting steps, contact National
Instruments.
How do I use an NI-CAN language interface?
For information about using NI-CAN language interfaces, refer to
Chapter3, Developing Your Application, in the NI-CAN User Manual.
How do I use NI-CAN from within LabVIEW or BridgeVIEW?
For information about using NI-CAN from within LabVIEW or
BridgeVIEW, refer to Chapter3, Developing Your Application, in the
NI-CAN User Manual.
Why does the uninstall program leave some components installed?
The uninstall program removes only items that the installation program
installed. If you add anything to a directory that was created by the
installation program, the uninstall program does not delete that directory
because the directory is not empty after the uninstallation. You must
remove any remaining components yourself.