Controls and Indicators

keel offset. Pressing  and  will change the keel-offset setting.

Keel Display

CORC124

Holding M in for two seconds will save the new keel offset setting and change the display back to the normal depth mode. The keel offset is normally a negative number.

Units

Change the unit of measure.

This display will show “UNIT FT” for feet (default), “UNIT FA” for fathoms, or “UNIT M” for meters. Pressing  and  will cycle through the choices. Pressing and holding the M will save the units shown in the display and change the display back to the normal depth mode.

4-27