Section 8

Rudder Remote Lube Fitting

The remote lube fitting allows for easy access to lubricating the rudder. The remote lube fitting is located at the stern of the engine compartment. Use a quality marine grease and gun. Connect the grease gun to the fitting and apply a light pressure to the gun until you feel a slight resistance.

Transmission-226 Only

A

(“H”)

(“L”)

CORC154

Oil Level Inspection

NOTICE

Check the oil with the boat level and the engine OFF.

Remove the oil level gauge (A). The oil level should be between “H” and “L” marks on the gauge. Verify the oil level with the gauge fully inserted into the V-Drive housing. DO NOT overfill. Use fresh SAE 30 motor oil only. To add or fill, unscrew the breather cap (B) and add or fill through the breather cap elbow (C).

Approximate

2 pints

oil capacity

(.95 l)

Reinstall the gauge and the breather cap. Run the engine and stop the engine. Allow the boat to rest momentarily and then verify oil level. Add oil if necessary.

8-14

Correct Craft, Inc.