Section 8
1.Remove the drain plug (D) located in the bottom cover (E), opposite the oil strainer (F). Reinstall the drain plug after all the oil has drained.
2.Disconnect the oil hose (G) from the strainer elbow (H), but do not remove the elbow.
3.Unscrew the strainer from the elbow and clean the strainer.
•If the strainer is cleaned with a solvent, allow the strainer to dry before installing.
•Reinstall the strainer onto the elbow, install the strainer and elbow into the housing and reinstall the oil hose.
4.Remove the two magnetic screw plugs (I), located diagonally opposite, on the housing.
•Verify the plugs removed are magnetic by placing another metallic object to the plugs. Remove only the magnetic plugs.
•Clean any debris from the plugs and reinstall them into the holes they were removed from.
•Refill the housing following Oil Level Inspection.
Dispose of used oil in an environmentally safe manner.
Correct Craft, Inc. |