Naut Air Sec 4_2008.qxd:Naut Air Sec 4.qxd 6/24/08 3:54 PM Page 5
Controls and Indicators
Emergency Stop Switch
The emergency stop switch will stop the engine when the lanyard is pulled far enough to disengage it from the switch. Attach the lanyard to the boat operator whenever the engine is running but be aware there will be a loss of engine power if the switch is activated. If the operator is thrown from the seat, or moves too far from the helm, the lanyard will become disconnected from the switch, shutting off the engine. Refer to Section 1 for more information.
CAUTION
DO NOT allow your boat to be operated without the proper use of the emergency stop switch and lanyard.
EMERGENCY STOP SWITCH
CLIP 
LANYARD 
HOOK
CORC0224
To attach a lanyard, connect the clip to the emergency stop switch and the hook to a strong piece of clothing on the operator, such as a belt loop.
NOTICE
The engine will not start unless the emergency stop switch is attached.
