NDC comm HWB3163 manual PC Card Evaluation, Hardware Installation, Using the Laneval Software

Models: HWB3163

1 11
Download 11 pages 3.23 Kb
Page 3
Image 3

Application Note 9864

Hardware Installation

Step 1. Ensure that power to the PCMCIA slot is OFF by noting that the PCMCIA icon does not appear in the System Tray on the Desktop. If unsure, re-boot the computer.

Step 2. Insert the wireless LAN PC card extender card into the PCMCIA slot.

Step 3. Insert the wireless LAN PC card into the end of the extender card. Ensure that the LED and pin headers of the extender card are on the same side. Both the card and the extender are keyed so they will fit correctly. The HWB3163 is a 3V only device. Do not therefore force it in a 5V-keyed system as permanent damage may occur.

PC Card Evaluation

This chapter describes several software programs supplied with the kit. It also details some diagnostic test points that may be accessed on the card.

Using the PRISM Test Utility (PTU) Software

The PTU permits continuous operation of the transmitter. It is therefore convenient for performing RF measurements such as Transmitter Power. It also provides a handy method of changing channels within the ISM band, Use of the PRISM Transmitter Test Utility is basically self explanatory. An icon was automatically created on the desktop when the PTU installation was performed. It may be run by double- clicking on this icon.

Using the LANEVAL Software

LANEVAL provides a convenient method of analyzing Packet Error Rate (PER) and Receiver Sensitivity. An icon for starting LANEVAL was automatically placed on the desktop when the PTU installation was performed. In order for LANEVAL to form a successful link, the same packet parameters (e.g., Packet Length, Packet Pad Words, etc.) most be programmed at each end of the link.

LANEVAL runs in conjunction with the NDC Driver. The Driver permits selection of Data Rate and Channel. It is normally run in the Pseudo IBSS mode as this provides a simple wireless Ad Hoc link between two computers. The NDC Driver may be easily accessed by double-clicking on its icon (looks like a computer with an antenna on top) located in the System Tray area on the desktop.

List of Test Instruments

The following instruments may be used for conducting tests on the wireless LAN PC card.

INSTRUMENT

MANUFACTURER

MODEL

 

 

 

Spectrum Analyzer

Hewlett-Packard

8595E

 

 

 

Power Meter

Giga-tronics

8541B

 

 

 

Signal Generator

Hewlett-Packard

8648C

 

 

 

INSTRUMENT

MANUFACTURER

MODEL

 

 

 

Frequency Counter

Hewlett-Packard

53181A (012 Option)

 

 

 

Digital Scope

 

 

 

 

General-Purpose Multimeter

 

 

Computer with a PCMCIA Connection Slot (2 required)

 

 

 

3V PCMCIA

Swart Interconnect

EXT PCM-68-CC

Extender Card

 

NOTE: This is a 5V

 

 

Extender and must be

 

 

mechanically

 

 

modified for 3V

 

 

operation)

 

 

 

Differential Probe

Tektronix

P6247

 

 

 

RF Probe, 500

Hewlett-Packard

54006A + 11742A

 

 

 

3

Page 3
Image 3
NDC comm HWB3163 manual PC Card Evaluation, Hardware Installation, Using the Prism Test Utility PTU Software

HWB3163 specifications

The NDC comm HWB3163 is a cutting-edge wireless broadband device designed to enhance connectivity in both enterprise and residential environments. This powerful hardware bridges the gap between high-speed internet access and the need for reliable, uninterrupted service across multiple devices.

One of the main features of the HWB3163 is its advanced MIMO (Multiple Input, Multiple Output) technology. This feature boosts the device's ability to manage multiple data streams simultaneously, resulting in increased throughput and improved performance. MIMO significantly enhances the connection quality, particularly in environments with multiple users or devices, making it ideal for both home and office setups.

The HWB3163 also incorporates the latest Wi-Fi 6 (802.11ax) technology, which is designed to deliver faster speeds, higher capacity, and improved performance in congested areas. Wi-Fi 6 enhances the user experience by supporting more simultaneous connections and minimizing latency. This is essential for environments where multiple devices are connected, such as smart homes or busy workplaces.

Another noteworthy characteristic of the NDC comm HWB3163 is its comprehensive security features. The device includes advanced encryption protocols such as WPA3, ensuring that users' data remains secure while being transmitted over the network. This added layer of security is crucial for protecting sensitive information, particularly in business settings where data integrity is paramount.

In addition to its robust technical specifications, the HWB3163 is designed with user-friendliness in mind. The intuitive web-based interface allows for easy setup and management, making it accessible even for those with minimal technical expertise. The device supports remote management, allowing users to monitor performance and troubleshoot issues from anywhere.

The NDC comm HWB3163 is equipped with multiple Ethernet ports, allowing for easy wired connections to devices such as computers, printers, and smart TVs. This versatility ensures that users can benefit from both wired and wireless connectivity, optimizing their network capabilities.

In conclusion, the NDC comm HWB3163 is a sophisticated wireless broadband solution that combines advanced technologies and user-friendly features. With its MIMO technology, Wi-Fi 6 support, robust security measures, and intuitive management options, it stands out as a versatile choice for users seeking reliable and high-speed internet connectivity. Whether for home use or in a business environment, the HWB3163 meets the demands of modern internet usage, ensuring that users stay connected and productive.