ND-71548 (E) CHAPTER 1
Page 7
Issue 2
INTRODUCTION
2.4 Figure and Table Numbers
Each Figure and Table within this manual are numbered as shown below.
1. Figure and table in NAP
Figure XXX-X
Serial number of Figures in each NAP
Serial number (000-999) of the NAP in which the Figure exists.
2. Other figure and table
Tabl e X-X
Serial number of Table in each Chapter
Number of the Chapter in which the Table exists.
Understanding this numbering rule will help you when looking for the desired Figure or Table.
2.5 Essential/Critical Information
To prevent accidents or equipment damage from occurring while work is being performed, each manual pro-
vides WARNING, CAUTION, and Note: indications to draw the technician’s attention to specific matters.
1. Meaning
WARNING: Personal injury may result if the warning is not heeded.
CAUTION: Damage to the equipment and/or the system may result if the caution is not heeded.
Note: Indicates an item which requires special attention.
2. Locations of Indicators
WARNING and CAUTION indications are located at the top of the page. Notes are included as part of the
work procedures on the page.