Figure 13. Moving the Cabinet Down the Pallet Ramp
msys104
3.Check the cabinet and systems for damage, as the next section describes.
Checking the Cabinet and Systems
Check the cabinet, systems, and optional components for damage:
1.Open the rear door of the cabinet. From the bottom of the cabinet, remove and discard the desiccant bags.
2.Check the cabinet and systems for damage. Verify that the cabinets and panels have no dents, scratches, or scrapes.
If you notice damage, contact the vendor from which you
purchased your systems. If you purchased your systems from NEC Corporation of America, contact the NEC Technical
Support.
