THE BATTERY CHARGE INDICATOR
The Battery Charge Indicator can be accessed by pressing [FCN] [8] keys after power has been applied to the phone. The display screen indicates the battery charge level ranging from [o] to [oooo]. [o] representing low battery and [oooo] representing full battery.
PWR
b a t t o o o o
CHARGING AND RECHARGING THE BATTERY
Charging the battery can be accomplished two ways.
(A)By direct connect of the AC Adapter to the charging jack of the phone.
(B)By placing the phone into the charging stand.
(A)
1. Plug the AC Adapter into a standard
110V AC outlet.
2. Insert the DC plug into the phones battery jack.
3. With PWR on display will show: (B)
1.Plug the AC Adapter into a standard 110V AC outlet.
2.Plug the Charging Stand into the Adapter.
(A) | (B) |
Note: Initial charging and recharging of the battery usually takes approximately 10 hours.
A new battery must be fully charged before being used for the first time.
Batteries last longer and perform better if allowed to discharge fully at least once a week. You can do this by leaving the phone switched on overnight, or until the message RECHARGE BATTERY is displayed and the phone shuts itself off.
NOTE: If the battery is too hot or cold, charging will be interrupted until the battery reaches a normal temperature.
