NEC E900+ user manual Quick Start

Quick Start

To attach the MultiSync® E900+™ monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.If necessary, install the display card into your system. For more information, refer to the display card manual.

3.For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync E900+ Macintosh cable adapter (not included) to the monitor connector on the Macintosh (Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal cable to the MultiSync E900+ Macintosh cable adapter on the computer (Figure B.1). Tighten all screws.

NOTE: To obtain the MultiSync E900+ Macintosh cable adapter, call NEC Technologies at (800) 820-1230.

4.For download information on the Windows® 95 INF file for your MultiSync E900+ monitor, refer to the References section of this User’s Manual.

5.Connect one end of the power cord to the MultiSync E900+ monitor and the other end to the power outlet (Figure C.1).

6.Turn on the monitor (Figure D.1) and the computer.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Figure A.1

2

78133521 4 5/15/98, 2:16 PM