Durability, resistance, reliability - all validated by testing
*Refer to the installation environment requirements for information on the evaluation parameters for each test.
■Splash resistance test (IP54 compliant) While turned off, water is sprayed onto the device from all directions for 5 minutes at a rate of 10ℓmin.
■Dust resistance test (IP54 compliant) While turned on, the device is left for 8 hours inside a machine decompressed to 2KPa in which talcum powder was circulating
■Impact test
While turned on, the device is subjected to half sine wave impacts at a peak value of 147 m/s2 (15G) and a cycle of 11 ms.
While turned off, the device is subjected to half sine wave impacts with a peak value of 490 m/s2 (50G) and a cycle of 11 ms.
4