8MONITOR Output Jack (OUTPUT)
MONITOR (BNC) ........... Outputs the signals of the equipment con-
nected to VIDEO 1 through 5.
S-VIDEO.......................... Outputs an S video signal, (derived from
the signal of the equipment connected to
VIDEO 1 or VIDEO 2), which has been
divided to a luminance signal (Y) and a
chrominance signal (C).
AUDIO L and R (RCA)... Outputs the signal of the equipment con-
nected to VIDEO input 1 through 5 and the
AUDIO L and R associated with the RGB
input connector.
The selected video signal is output when
RGB input has been selected and MONI-
TOR button is switched on.
9RGB Output Connector (OUTPUT)
RGB (BNC)...................... Connected to the RGB input jacks of a
monitor or projector having a 31.5 kHz
horizontal scanning function.
HORIZONTAL (BNC) .... Connected to the HORIZONTAL input
jack of a monitor or projector having a 31.5
kHz horizontal scanning function.
VERTICAL (BNC) .......... Connected to the VERTICAL input jack of
a monitor or projector having a 31.5 kHz
horizontal scanning function.
H/V (BNC) ....................... Connected to the H/V input jack of a moni-
tor or projector having a 31.5 kHz horizon-
tal scanning function.
AUDIO L and R (RCA) ... Connected to the audio input jacks of RGB
equipment.
0HV POL. Switch
Selects the polarity of the horizontal and vertical output signals.
H.............. Horizontal
V.............. Vertical
Hi............. Active high
Lo ............ Active low
APC-CONTROL SW (Switch)
Selects the communications standard of the PC-CONTROL connector.
422........... RS-422 standard
232........... RS-232C standard
BAC IN Receptacle
Used to connect the supplied power cord.
CPC-CONTROL Connector (15-pin connector)
Connect to a personal computer or other control equipment.
0ADEXTERNAL CONTROL Connector
Connections are made to this connector when controlling this unit by
external control.
(See the “External Control Mode” section.)
NOTE :
• Use a signal conforming to the standard TV signal when connecting
an input source.
• Using poor quality video tape may cause distortion on the picture.
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Signal to be connected
Red input
Green input
Blue input
GND
GND
Red GND
Green GND
Blue GND
Open
Sync GND
GND
Open
H-Sync
V-Sync
Open
54321
10 9 8 7 6
15 14 13 12 11