VIDEO NTSC PAL
12 3 4 5
MONITOR
RGB
NOISE
REDUCTION
MOVIE STILL
12 1 2 3
INDICATORS
6NR Button
Used when screen noise becomes annoying. Each time this button is
pressed, the NR function will change as follows:
→ OFF → NOISE REDUCTION1 → NOISE REDUCTION 2
(Noise is reduced) (Noise is further reduced)
7MOVIE Button
Press to manually set the method of Y/C separation and image interpo-
lation.
8STILL Button
Press to display still images such as those from document cameras, etc.
The Y/C separation and image interpolation will be set for the still
screen mode.

EFG

6

LKJIH

9NORM. SET Switch
This is an adjustment switch for service personnel.
0NORMALIZE Button
Sets the various adjustments to the standard settings (which had been
set at the factory prior to shipping).
ARGB Button
Switches the unit to the RGB input mode.

7

BMONITOR Button
Switches the MONITOR OUT jack output at the time of RGB input.
Each time this button is pressed, the MONITOR OUT jack output will
change as follows:
→ VIDEO1 → VIDEO2 → VIDEO3 → VIDEO4 → VIDEO5 → OFF
CVIDEO 1 through 5 Button
Switches the video input mode.
DREMOTE Jack
For service personnel only.
ERemote Sensor Window
Receives the signal from the wireless remote control.
FVIDEO 1, 2, 3, 4, 5 Indicator
Lights when the unit is switched to the video input mode with the
VIDEO 1 through 5 buttons.
GNTSC Indicator
Lights when an NTSC standard signal is received. IDTV processing is
in operation when this indicator is lit.
HMONITOR Indicator
Lights when the MONITOR OUT output is selected at the time of RGB
input.
IRGB Indicator
Lights when the unit is switched to the RGB input mode with the RGB
button.
JNOISE REDUCTION 1 and 2 Indicators
Indicate the mode selected with the NR button.
KMOVIE 1, 2 and 3 Indicators
Indicate the mode selected with the MOVIE button.
LSTILL Indicator
Lights when the STILL button is switched on.