NEC FP1350X, JC-22W72 manual USB downstream port

Quick Start cont.

Power Outlet

Power

Cord

Figure C.1

DVI/D-SUB

Power Button

MultiSync

EXIT PROCEED RESET DVI/D-SUB

Figure D.1

If your computer is equipped with USB and uses the Windows® 98 operating system and you want to operate the monitor’s user controls using your system, you can install USB support by using the following procedure. To attach the USB port on your MultiSync® FP1350X™ monitor to a USB port on your system:

1.Using the supplied USB cable, connect the USB Series B connector end to the USB upstream port on the monitor (Figure 1).

2.Connect the other end of the supplied cable to the USB downstream port on the computer (or to a USB Hub attached to the computer) (Figure 1).

3.Install the supplied Monitor Control Software.

USB upstream port

USB Series B connector end

USB downstream port

Figure 1

5

7A811011.WPC 7 5/18/00, 12:26 PM