AccuColor™ Control System
Color presets select the desired color setting. If a setting is adjusted, the name of the setting will change to Custom.
Color Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the color bars.
OSM™ Location
You can choose where you would like the OSM control image to appear on your screen. Selecting OSM Location allows you to manually adjust the position of the OSM control menu left, right, up or down.
OSM Turn Off Time
The OSM control menu will stay on as long as it is in use. In the OSM Turn Off Time submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10, 20, 30, 60 and 120 seconds.
OSM Lock Out
This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. To activate the OSM Lock Out function, press PROCEED, then 
and hold down simulta- neously. To 
and hold down simultaneously.
Display Mode
Display Mode provides information about the current resolution display and technical data including the preset timing being used and the horizontal and vertical frequencies.
NOTE: Mode Change should only be used if a resolution is not recognized by the monitor. The user can change to the appropriate resolution by entering the Display Mode
Language Select
OSM control menus are available in six languages.
Factory Preset
Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. The RESET button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.
5
78133331 | 7 | 9/25/98, 12:46 PM |
