NEC LCD1550M, LA-15R03-BK manual Tilt and swivel, Remove Monitor Stand for Mounting

Quick Start –continued

Tilt and swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Remove the connector cover and the cable cover (Figure R.1).

2.Disconnect all cables.

3.Place monitor face down on a non-abrasive surface (Figure R.2).

4. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.2).

The monitor is now ready for mounting in an alternate manner.

Figure TS.1

Figure R.1

5.Connect the AC cord, signal cable and Audio cable to the back of the monitor (Figure R.3).

6.Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method.

When the monitor stand is removed, the USB capabilities will be disabled.

	Figure R.2
Non-abrasive	Figure R.3
surface

6