Troubleshooting

No picture

The signal cable should be completely connected to the display card/computer.

The display card should be completely seated in its slot.

Check the Vacation Switch should be in the ON Position. Front power Switch and computer power switch should be in the ON position.

Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

Check the monitor and your display card with respect to compatibility and recommended settings.

Check the signal cable connector for bent or pushed-in pins.

Power Button does not respond

Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Check the Vacation Switch on the right hand side of the monitor.

Image Persistence

Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display-Europe recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Image is unstable, unfocused or swimming is apparent

Signal cable should be completely attached to the computer.

Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the display mode is changed, the OSM Image Adjust settings may need to be readjusted.

Check the monitor and your display card with respect to compatibility and recommended signal timings.

If your text is garbled, change the video mode to non-interlace and use 60 Hz refresh rate.

Message “OUT OF RANGE” is displayed (screen is either blank or shows rough images only)

OSM warning “OUT OF RANGE” is displayed on a blank screen: Signal frequency is out of range. Choose one of the supported modes.

LED on monitor is not lit (no green or amber colour can be seen)

Power Switch should be in the ON position and power cord should be connected.

Display image is not sized properly

Use the OSM Image Adjust controls to increase or decrease the Coarse total.

Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

No Video

If no video is present on the screen, turn the Power button off and on again.

Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

English-14

Page 15
Image 15
NEC LCD1560NX user manual Troubleshooting

LCD1560NX specifications

The NEC LCD1560NX is a notable addition to the world of LCD monitors, particularly appealing to users who prioritize image quality and ergonomic design. Released as part of NEC's wide array of display technologies, this monitor exemplifies the convergence of functionality and advanced display technologies.

One of the standout features of the LCD1560NX is its 15-inch diagonal screen size, which strikes an excellent balance between compactness and usability. This size makes it particularly suitable for various environments, including educational settings, office environments, and even home use where space is limited. The monitor's resolution of 1024 x 768 pixels is optimized for both text and graphics, ensuring clear and crisp images that enhance the user's experience.

The LCD panel technology employed in the LCD1560NX is TFT (Thin Film Transistor), which is renowned for delivering exceptional color reproduction and fast response times. The 16.2 million colors supported by the monitor enable remarkably vivid visual experiences, making it a good option for graphic designers and multimedia professionals. The monitor also boasts a wide viewing angle, allowing users to see consistent colors and brightness levels from various positions, which is particularly beneficial in collaborative environments.

Ergonomic features are another highlight of the NEC LCD1560NX. The monitor comes equipped with a height-adjustable stand allowing users to customize the viewing height to reduce strain during prolonged use. Additionally, it supports tilt and swivel adjustments, further enhancing user comfort and contributing to a healthy workspace.

Connectivity is an essential aspect of any monitor, and the LCD1560NX does not disappoint. It offers a variety of input options, including VGA and DVI, ensuring compatibility with a wide range of devices. The monitor's energy efficiency is also commendable, as it complies with various environmental standards, making it a green choice for eco-conscious consumers.

In summary, the NEC LCD1560NX is a versatile and reliable LCD monitor that combines advanced display technologies with ergonomic features. With its compact size, high-quality image display, and thoughtful design elements, it caters to a diverse range of users, making it a commendable option in the competitive monitor market. Whether for professional use or casual browsing, the LCD1560NX continues to stand out as a solid choice.