Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC LCD COLOUR MONITOR:

•DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.

¥Do not spill any liquids into the cabinet or use your monitor near water.

¥Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

¥Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.

¥Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

¥Do not place any objects onto the monitor and do not use the monitor outdoors.

¥The inside of the fluorescent tube located within the LCD monitor contains mercury. Please follow the bylaws or rules of your municipality to dispose of the tube properly.

¥Do not bend power cord.

¥Do not use monitor in high temperatured, humid, dusty, or oily areas.

¥Do not cover vent on monitor.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

•When the power supply cord or plug is damaged.

¥If liquid has been spilled, or objects have fallen into the monitor.

¥If the monitor has been exposed to rain or water.

¥If the monitor has been dropped or the cabinet damaged.

¥If the monitor does not operate normally by following operating instructions.

¥If glass is broken, handle with care.

¥If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

CAUTION

•Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

¥ The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet which is easily accessible.

¥ Handle with care when transporting. Save packaging for transporting.

¥ Image Persistence: Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or ÒghostÓ image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitorsÕ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

English-10

Page 11 Page 13
Page 12
Image 12
NEC LCD2070VX, LCD2070NX user manual Recommended use, Safety Precautions and Maintenance, English-10
Page 11 Page 13

LCD2070VX, LCD2070NX specifications

The NEC LCD2070VX and LCD2070NX are two notable monitors within NEC's esteemed lineup, designed to cater to both professional and corporate environments. These models are celebrated for their robust build quality, impressive display capabilities, and a range of features tailored to enhance user experience.

The LCD2070VX features a 20.1-inch active matrix TFT LCD panel, boasting a native resolution of 1600 x 1200 pixels. This high resolution supports an outstanding pixel density, allowing for crystal-clear images and smooth text rendering, ideal for tasks that require fine detail, such as graphic design and data analysis. The monitor also offers a wide viewing angle of 178 degrees both horizontally and vertically, ensuring that colors remain consistent and vibrant from virtually any perspective.

On the other hand, the LCD2070NX shares similar dimensions, also sporting a 20.1-inch display and native resolution of 1600 x 1200. This monitor is equipped with an advanced IPS technology that enhances color reproduction and improves viewing angles, making it particularly suitable for collaborative work environments where multiple viewers need to see the screen simultaneously without distortion.

Both models feature an impressive brightness level of up to 250 cd/m² and a contrast ratio of 1000:1, providing deeper blacks and brighter whites, which contribute to an overall vivid picture quality. The panel response time of around 25 ms ensures that fast-moving images are rendered smoothly, reducing blurring in dynamic content.

Connectivity is another strong point of these monitors. They are equipped with multiple input options, including VGA and DVI-D, allowing for compatibility with a wide range of computers and devices. This flexibility is particularly valuable for environments with multiple systems and varying needs.

The ergonomic design of the LCD2070VX and LCD2070NX includes adjustable height, tilt, and swivel options, enabling users to customize their viewing experience for optimal comfort. Additionally, both monitors incorporate energy-saving features that comply with various environmental standards, helping reduce power consumption and contributing to sustainability efforts.

In conclusion, the NEC LCD2070VX and LCD2070NX are designed for professionals seeking high-quality displays with excellent color accuracy, generous connectivity options, and user-friendly features. Whether for graphic design, data processing, or general office work, these monitors embody the reliability and performance that NEC is renowned for in the display industry.
Top Page Image Contents