E – 14
Using Remote Mouse Receiver
The remote mouse receiver enables you to operate your computer's mouse functions from the remote control (Computer mode). It is a great
convenience for clicking through your computer-generated presentations. To return to the Projector mode, press the PJ button (lit red).
Connecting the remote mouse receiver to your computer
To use the remote mouse function, connect the remote mouse receiver to your computer with one of the remote mouse cables (USB, PS/2 or Mac
ADB). Choose the appropriate mouse cable for your computer.
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings.
Computer
To USB port of PC or
Macintosh
To Mouse port of PC
To ADB port of Macintosh
USB Cable
PS/2 Cable
Mac (ADB) Cable
To USB
To PS/2 or Mac
Notes on Connecting with USB Cable
*When you use an IBM PC, the Remote mouse receiver does not support the other operating systems than Windows 98/2000.
*Do not pull out the cable from the USB port of your PC or the remote mouse receiver and then immediately insert it back into the USB port. Allow
a minimum of 5 seconds to elapse between insertion and extraction of the cable.
Doing so repeatedly can result in your PC failing to detect the remote mouse receiver.
*The supplied USB cable is designed especially for the Remote mouse receiver. If you use the USB cable with other equipment, we do not assure
the correct functioning of the equipment.
Remote sensor on the
remote mouse
receiver
Remote mouse receiver
When operating a computer via the remote mouse receiver
7m
30˚
30˚