3-2 Using the Admin Tabs
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
The Handset Settings Editor is used to configure handsets, as well as
create, save and copy Admin menu options. See “Opening the Settings
Editor” on page 4-1 for detailed instructions on using the Handset
Settings Editor.
Indicators The Handset Administration Tool uses indicators to alert you to the
status of the action being performed.
•Green - indicates ready status.
•Yellow - indicates caution or attention.
•Red - indicates an error
•Gray - indicates not active status.
•Blinking - indicates entry is needed or waiting on system response.
If closed, the Admin Tabs may be opened from the Settings Editor by selecting the
Admin or View option on the Settings Editor menu bar.
Connecting the Handset
There are six tab labels that describe each of the available functions.
The tab labels are: Connect, Password, Error info, Firmware,
Settings, and Version. See Figure 3-2.
The Connect tab has a prompt line which will state one of three
messages: Power handset off, then put it in the Dual Charger;
Enter handset's password; or Connected.
Figure 3-2
Connect tab prompt:showing the next action or status.
NOTE