ControlSync
1.Connect the master monitor with a sub monitor via a ControlSync cable (ø 2.5) into ControlSync IN/OUT.
2.Follow the steps of DATA COPY. When the setting of the master monitor is adjusted, it will be copied and sent to the connected sub monitor(s) automatically.
3.Up to 5 sub monitors can be
NOTE: Connect the master monitor via ControlSync OUT connector. |
| ControlSync icon |
| ||
The ControlSync icon will appear on the upper left of the OSD menu in the sub monitor. |
|
|
Do not connect |
|
|
Do not make “loop” connection. |
|
|
Once the monitors are connected, turn the master monitor’s power button off and on |
|
|
to check if ControlSync operates correctly. |
|
|
Master Monitor |
|
|
English
Sub Monitor 1 | Sub Monitor 2 |
OUT (Black)
IN (Gray) |
| IN OUT | IN OUT | Up to 5 sub monitors |
(Black) | (Gray) | (Black) | (Gray) | Next monitor |
|
|
|
| |
ControlSync cable | ControlSync cable |
| ||
The following settings can be controlled by ControlSync:
ECO TOOLS | BRIGHTNESS* | Yes |
| CONTRAST | No |
| ECO MODE | Yes |
| AUTO BRIGHTNESS | Yes |
| BLACK LEVEL | No |
| OFF MODE SETTING | Yes |
| OFF MODE SENSOR SETTING | Yes |
| OFF MODE START TIME | Yes |
| HUMAN SENSING | Yes |
| HUMAN SENSOR SETTING | Yes |
| HUMAN SENSOR START TIME | Yes |
| DV MODE | Yes |
SCREEN | AUTO ADJUST | No |
| AUTO CONTRAST | No |
| LEFT/RIGHT | No |
| DOWN/UP | No |
| H.SIZE | No |
| FINE | No |
| INPUT RESOLUTION | No |
COLOR | Color preset | Yes |
| R, G, B, color gain | No |
TOOLS | VOLUME | Yes |
| SOUND INPUT | No |
| VIDEO LEVEL | No |
Other settings:
Power Control (DC switch)
Ambient Sensor
Human Sensor Result
Audio Mute
TOOLS (continuation) | OVER SCAN | No |
| VIDEO DETECT | No |
| EXPANSION MODE | Yes |
| RESPONSE IMPROVE | No |
| OFF TIMER | Yes |
| LED BRIGHTNESS | Yes |
| DDC/CI | Yes |
| FACTORY PRESET | No |
MENU TOOLS | LANGUAGE | Yes |
| OSD TURN OFF | Yes |
| OSD LOCK OUT | Yes |
| HOT KEY | Yes |
| SIGNAL INFORMATION | Yes |
| SENSOR INFORMATION | Yes |
| KEY GUIDE | Yes |
| CUSTOMIZE SETTING | No |
ECO INFORMATION | CARBON SAVINGS | No |
| CARBON USAGE | No |
| COST SAVINGS | No |
| CARBON CONVERT SETTING | Yes |
| CURRENCY SETTING | Yes |
| CURRENCY CONVERT SETTING | Yes |
NOTE: Only the master monitor’s human sensor and ambient sensor are active. Please do not cover these sensors. Turn the monitor’s power off before connecting/disconnecting the ControlSync cable.
Do not use the ControlSync connectors for any purpose other than specifi ed.
* This value is not a directly adjusted output value. This is adjusted relatively.
