8
30°
30°
1. Intro duction
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not heat, take apart, or throw batteries into re.
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries' polarity (+/–) aligned correctly.
• Do not use new and old batteries together, or use different types of batter ies together.
• Dispose of used batteries according to your l ocal regulations.
Operating Range for Wir eless Remote Control
Battery Installation
1Press rmly and slide the
battery cover off.
2Install new batteri es (AAA). En-
sure that you have the batteries'
polarity (+/–) aligned correctly.
3Slip the cover back over the bat-
teries until it snaps into place. Do
not mix different types of batteries
or new and old batteries.
Remote sensor on projector cabinet
Remote control
7m/22 feet
• The infrared signal operates by line-of-sight up to a dist ance of about 22 feet/7 m and within a 60 -degree angle
of the remote sensor on the projector cabinet.
• The pr ojector will not respond if there are objects between the remote contr ol and the sensor, or if strong light
falls on the sensor. Weak batteries will also prevent the remote control from properly operatin g the projector.