NEC NP900CM manual Installation to Threaded Rod, 7 of

Installation to Threaded Rod

2 Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 2.7 or figure 2.8.

1/4-20 THREADED ROD
(NOT INCLUDED)	1/4-20 THREADED ROD
	(NOT INCLUDED)
1/4-20 HEX THIN	1/4-20 HEX THIN
	NYLON-INSERT
NYLON-INSERT
	LOCKNUT
LOCKNUT
	(NOT INCLUDED)
(NOT INCLUDED)

A	A
	ARROW
ARROW
	INDICATES
INDICATES	FRONT OF
FRONT OF	MOUNT
MOUNT

fig. 2.7	1/4-20 HEX THIN	1/4-20 HEX THIN	fig. 2.8
	NYLON-INSERT	NYLON-INSERT
	LOCKNUT	LOCKNUT
	(NOT INCLUDED)	(NOT INCLUDED)

7 of 10 ISSUED: 03-06-08 SHEET #: 055-9255-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.