Recommended use
For optimum performance when setting up and using the MultiSync
P1150 colour monitor, please note the following:
–The optimum monitor position is away from direct sunlight.
–Place the monitor just below eye level for the ideal viewing
angle.
–Allow adequate ventilation around the monitor so that heat can
properly dissipate.
–Do not place any heavy objects on the power cord. Damage of
the cable may cause shock or fire.
–Keep the monitor away from high capacity transformers,
electric motors and other devices which may create strong
magnetic fields.
–Use the monitor in a clean, dry area.
–Handle with care when transporting.
–We recommend to adjust the brightness in a way that the
background raster disappears.
–For ergonomical reasons we recommend not to use the
position of the maximum contrast control.
–For ergonomical reasons the preset size and position is
recommended with the standard signals.
–For ergonomical reasons preset colour setting and preset
side-pincushion setting is recommended.
–For ergonomical reasons we recommend using
non-interlaced signals with a vertical refresh rate between
75 and 160 Hz.
–For ergonomical reasons we recommend not to use the primary
colour blue on dark background ( it is difficult to recognise and
produces eye fatigue due to insufficient contrast).
E - 6 Recommended use