Fig. 27 Removing the top cover screws
2.Disconnect the microphone and the CMOS battery from the main board and take them out of the system.
3.Remove the two screws at the back of the system that are marked in Fig. 28
Fig. 28 Removing screws on the back of the system
4. Release the five small latches in the battery compartment.(Fig. 29 )
Fig. 29 Disengaging the latches in the battery compartment
5. Carefully lift up the top cover from the front side of the case and put it aside.
Removing the Main Board
To remove the main board, first remove the top cover (see Removing the Top Cover), then
A
B
C
D
NEC Versa S900 Disassembly Manual | Page 16 |