User’s Manual U14337EJ1V0UM00 5
INTRODUCTION
Target Readers This manual is intended for users who design and develop application systems using
the V850/SV1™.
Purpose The purpose of this manual is to describe the proper operation of the IE-703040-MC-
EM1 and its basic specifications.
Organization This manual is divided into the following parts.
• Overview
• Names and functions of components
• Cautions
How to Read This Manual It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
The IE-703040-MC-EM1 is used connected to the IE-703002-MC in-circuit emulator.
This manual explains the basic setup procedure and switch settings of the IE-
703002-MC when it is connected to the IE-703040-MC-EM1. For the names and
functions of parts, and the connection of elements, refer to the IE-703002-MC User’s
Manual (U11595E).
To learn about the basic specifications and operation methods
→ Read this manual in the order of the CONTENTS.
To learn the operation methods and command functions, etc., of the IE-703002-MC
and IE-703040-MC-EM1
→ Read the user’s manual of the debugger (sold separately) that is used.
Conventions Note: Footnote for item marked with Note in the text
Caution: Information requiring particular attention
Remark: Supplementary information
Numeral representation:Binary … xxxx or xxxxB
Decimal … xxxx
Hexadecimal … xxxxH
Prefix indicating the power of 2 (address space, memory capacity):
K (kilo): 210 = 1024
M (mega): 220 = 10242
Terminology The meanings of terms used in this manual are listed below.
Target device The device that is targeted for emulation.
Target system The system (user-built system) that is targeted for debugging. This
includes the target program and user-configured hardware.