NEC Versa M540 Removing the Multi Card Slot

5. Remove two screws at the VGA port to separate Main Board from System Bracket.

M3x7 Silver

Fig. 33 Releasing System Bracket

Removing the Multi Card Slot

To remove the Multi Card Slot, first remove the Main Board (see Removing the Main Board), then perform the following steps:

1.Unscrew the screws on the Multi Card Slot assembly as shown in Fig. 34 and remove the Multi Card Slot from the Main Board.

M2x3.5 Black

Fig. 34 Multi Card Slot

NEC Versa M540/PB EasyNote R7 Disassembly Manual Page 21