TECHNICAL SPECIFICATIONS
ADSL Compliance
ADSL
•ANSI T1.413 Issue 2
•ITU G.992.1 Annex A (G.dmt)
•ITU G.992.2 Annex A (G.lite)
•ITU G.994.1 (G.hs)
•Maximum Rate: 8 Mbps downstream and 1 Mbps upstream ADSL2
•ITU G.992.3
•ITU G.992.4
•Maximum Rate: 12 Mbps downstream and 1 Mbps upstream ADSL2+
•ITU G.992.5
•ITU G.992.5 Annex M
•Maximum Rate: 24 Mbps downstream and 1.2 Mbps upstream
ATM
•PPPoA (RFC 2364) and PPPoA Bridged mode
•PPPoE (RFC 2516) and PPPoE Bridged mode
•IPoA (RFC 2225)
•Bridged mode over AAL5 (RFC2684/1483)
•ATM Forum UNI 3.1 / 4.0 compliant PVCs
•UBR and CBR with traffic shaping
•OAM F4/F5 loopback cells
Bridging
•IEEE 802.1d
•Learning up to 4096 MAC addresses
•Transparent Bridging between 10/100 Mb Ethernet and USB
Routing
•NAT / PAT allows multiple users to share Internet access
•UPnP IGD with NAT traversal capability
•Port Forwarding: users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on the local network.
•Static routing & dynamic routing RIPv1/v2
•DNS Relay, Dynamic DNS
•DHCP Client/Relay/Server
•IGMP Proxy
•Support IP/Bridge QoS for different traffic classes
•Support reservation of bandwidth to guarantee voice quality of VoIP applications.
Supported Applications
•Application Level Gateways preset for Auth/Ident, DNS, FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET, TFTP & WEB servers. Multiple Virtual Servers can be setup in local network.
•VPN passthrough: PPTP & IPSEC.
•NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, Real Player, CuSeeMe, online gaming.
Security
•PAP, CHAP, and
•Firewall based on incoming & outgoing filtering of IP address/Port number/Protocol type.
•Ping blocking from WAN.
•DMZ hosting.
Configuration and Management
•Embedded web configuration interface with password protection
•Remote management control
•Telnet session for local or remote management
•System events logging
•DSL connection diagnostics
•Firmware upgrade via web browser
•User setting backup & restore
Hardware Interface
•One
•One Ethernet port for IEEE 802.3/802.3u 10/100
•One USB port compliant to USB v1.1
•One hidden reset button for restoring factory default settings
Chipset
•Broadcom BCM6338
Regulatory Approval and Compliance
•ACA
Power Requirement and Operation
Environment Requirement
•Power Adaptor: Output 9 VAC, 1A
•Power Consumption: less than 5 W
•Ambient Temperature: 0 to 40°C
•Relative Humidity: 20% to 90%
•Front Panel: 5 LED Indicators - Power, ADSL, PPP, Ethernet, USB
•Dimensions: 88mm(L) x 105mm(W) x 20mm(H)
•Weight: 58g
Package Contents
• NB6 ADSL2+ Modem Router | • | USB Cable | |
• | 9 VAC, 1A power supply | • Driver & Utility Software CD | |
• | • | User Guide - On CD | |
| cable | • | Quick Start Guide |
•
NetComm NB6
ADSL2+ Modem Router with Ethernet and USB interfaces
NB6 ADSL2+ Modem Router
Perfect for users who prefer having a direct connection through USB to their computer or for those who don’t have a network card the NB6 is the ultimate in choice with both Ethernet and USB connections to suit all users. The feature packed NB6 also comes with a NAT firewall, QoS and works with ADSL, ADSL2 and ADSL2+ and has an easy to use web interface for advanced users to configure the NB6 to suit their needs.
Internet
Connected to | Connected to |
Ethernet Interface | USB Interface |
Home
Telephone
Telephone
Wall Socket
Splitter with |
| NB6 |
Microfilter | Firewall | ADSL2+ Broadband Modem |
USB
Reset
Ethernet
On/Off, Power
Line | USB | Reset Ethernet |
| Power | |
|
|
|
|
|
|
Your NetComm dealer:
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P:02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.