ADSL2+ Router
Mac User Guide
Hardware Installation
Step 1 – Install the Hardware
To connect your modem using the Ethernet cable, follow these
1.Connect the ADSL cable.
Connect one end of the telephone cable provided to the port labeled ADSL on the rear panel of your NB6Plus4 Modem. Connect the other end to your wall phone jack.
2.Connect the Ethernet cable.
Connect one end of the Ethernet cable provided to the Ethernet port on your Mac and the other end of the cable to the Ethernet port of your NB6Plus4 ADSL Modem.
3.Attach the power connector.
Connect the AC power adapter to the Power connector on the back of the NB6Plus4 and plug in the adapter into a wall outlet or power strip.
4.Switch on the power. Your NB6Plus4 will start up. Turn on your Mac.
- NB6Plus4
