Management

Terminal

4-Wire Modem Router

 

3 YEAR WARRANTY*

Easy to connect with

1 year warranty out of the box.

 

step by step installation

Extra 2 years FREE with online

instructions.

registration at www.netcomm.com.au

 

 

*Conditional upon registration online.

Power Adaptor

into POWER Port Telephone Line Cables into WAN

Ports and

Powerpoint

Computer or

into SHDSL

LAN

Enabled Lines

Package Contents

￿NetComm 4 wire SHDSL Modem Router

￿Ethernet Cable

￿2 X RJ-11 Cables

￿AC Adapter

￿User Guide on CD ROM

￿Package Contents Note

Specifications

Hardware

Local Interface

￿Four 10/100BaseTX Ethernet switch, IEEE 802.3u, RJ-45 connectors

￿10 Half, 10Full, 100Half, 100Full, Auto Negotiation configurable for each port

￿Supports port based VLAN

WAN

￿Double SHDSL Line Interface

￿Data Rate: 144 Kbps up to 4.6Mbps rate adaptive

￿Line Code: PAM16

￿Line Impedance: 135 Ohms

￿Connection Loops: Two Pairs (4 wire)

￿Connector: RJ-11

Indicators

￿PWR – Green LED, indicates power and operation

￿ACT – Green LED, indicates LAN data Transmitting / Receiving

￿LINK – Green LED, indicates LAN data link status

￿WAN – Green LED, indicates SHDSL data link status

￿ALM – Red LED, indicates data error and operation fault

Management

￿Local: RS-232 Serial Port or Telnet, Web browser via Ethernet

￿Remote: SNMP, Telnet, or Web browser

Environment

￿Operation Temperature: 0˚C ~ 45˚C

￿Operation Humidity: 5% ~ 95%

￿Storage Temperature: -20 ~ +85˚C

￿Storage Humidity: 5%~95%

Physical Dimensions

￿(W x D x H) 220mm x 169mm x 40mm

Power

￿AC Adapter :Input 240 Volts AC/50Hz; Output 12VDC 1A

￿Power Consumption: Less than 10 Watts

Certificates

￿EMC: CE, FCC Part 15 class B, CB, A-Tick

Specifications

Software

ATM

￿ATM Cell over SHDSL, AAL5

￿Support UBR & CBR, VBR-nrt & VBR-rt

￿VPI Range (0-4095) and VCI range (1- 65535)

￿Supports up to 8 PVCs for Bridge and 5 PVCs for Router

￿Supports OAM F4/F5 loopback

￿Payload Encapsulation --

￿RFC2684 (RFC1483), multi-protocol over ATM

￿RFC2225 (RFC1577), IPoA

￿RFC2364, PPP over ATM (CHAP and PAP supported)

￿RFC2516, PPPoE (PPP over Ethernet) over ATM

Bridging

￿Transparent Bridging (IEEE 802.1D)

￿RFC2684 (RFC1483) Bridged

￿Spanning Tree Protocol (IEEE 802.1D)

￿Supporting IP, IGMP, and PPPoE packets filter function

￿Port based VLAN

Routing

￿TCP/IP with RIP1, RIP2, or static IP routing

￿NAT/PAT – RFC1631 (basic Firewall support)

￿RFC2684 (RFC1483) Routed

￿DNS Relay

Other

￿DHCP server for IP management

￿TFTP for firmware upgrade and configuration

NetComm is Australia’s dynamic data communications and networking solutions provider. For more information on this and other NetComm products, please visit www.netcomm.com.au

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the product.

Your NetComm Dealer:

NETCOMM LIMITED ABN 85 002 490 486 2-6 Orion Road, LANE COVE, NSW, 2066 • phone 02 9424 2070 • fax 02 9424 2010 • email sales@netcomm.com.au

www.netcomm.com.au

Page 2
Image 2
NetComm NB704 manual Package Contents, Specifications