![](/images/new-backgrounds/1188976/1889761x1.webp)
Quick Start Guide
The Quick Installation Guide will help you through the installation procedure for Windows 98/ME/2000/XP including basic hardware and software installation, as well as checking for wireless network availability. All the instructions below assume that there is an unencrypted wireless network. For detailed instructions on using
A.Software Installation
1.Insert the Resource CD into your CD-ROM drive.
3.Click the Start button and choose Run. In the field that appears, enter F:\software\ Setup.exe (“F” is the letter of your
Note: If Windows 2000 prompts “Digital Signature Not Found”, click Yes to continue the installation. If Windows XP warns about Windows
Logo testing, click Continue Anyway to continue the installation.
3.After installing the software, please plug the adapter into your PC. If you need instructions as to how to do this, please refer to Section B. Hardware Installation. If you had plugged it into your PC already, please unplug it and plug it in again. The OS will automatically detect the adapter and setup the driver for the adapter. If it does not, please follow the Windows setup steps to finish the driver installation.
Note: You may be prompted to insert the Windows 98
If (or)
appears in your system tray, congratulations! The installation of the NP545 is completed.
B.Hardware Installation
1.Connect one end of the USB cable to the NP545.
2.Connect the other end of the USB cable to the USB port on your computer.
C.Check wireless connection for Windows 98/ME/2000
(Attention Windows XP user: Go directly to Step D.)
After Installing the adapter, the adapter’s tray icon will appear in your system tray. If the icon is
(green), a wireless connection has been established. If the icon is
(gray), there is no connection. To establish a wireless connection, follow these steps below.
1. and the configuration screen of the utility will appear you can also run the utility by clicking Start> Program> NetComm> NP545> NP545 Wireless Client Utility. On the prompted configuration tab page, click the Site Survey tab of the Utility.
2.On the Site Survey screen that appears, click the Rescan button to refresh the list. Highlight an SSID and click the Connect button to connect an available network.
Note: If a
NP545
54Mbps Wireless USB Adapter