TECHNICAL SPECIFICATIONS

Standards Compliance

IEEE 802.11b/g

IEEE 802.3

IEEE 802.3u

SDRAM

8 M Byte

Flash

2 M Byte

Radio Frequency Type

DSSS / OFDM

Modulation

IEEE 802.11b: CCK,DQPSK,DBPSK

IEEE 802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM

Frequency Band

America/FCC: 2.412~2.462 GHz (11 channels)

Europe CE/ETSI: 2.412~2.472 GHz (13 channels)

Transmission Power

IEEE 802.11b: 20dBm

IEEE 802.11g: 20dBm

Transmission Rate

IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps

IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps

Super G: up to 108Mbps

Access Point Interfaces

Auto MDI/MMDI-X Ethernet 10/100Base-TX: RJ-45

Sensitivity

-86dBm @ 11Mbps,PER< 8%

-64dBm @ 54Mbps,PER< 10%

Antenna Type

5dBi detachable antenna with N type connection

Security Systems

64-bit/128-bit/152-bit/ WEP encryption

Wi-Fi Protected Access(WPA)

Wireless Setting

Operation Mode-AP/Wireless Client/Repeater/ Bridge(WDS)PtP and PtMP Mode

Software/Firmware

Site Survey

DHCP Client

Suppressed SSID

Wireless access control by MAC address (deny or accept)

WPA Support (WPA personal and enterprise)

Web-based configuration

Windows ”Locator” program to help find IP in DHCP client mode

Firmware upgrade and configuration backup via Web

Reset to default by WebUI

Operating Environment

Operating Temperature: -10 ~ +70°C

Power

DC 12 Volt + 5%; 1.5A (Max.)

AC adapter AC 100V ~ 240V

Regulatory Approval

FCC Part 15 B (US)

CE

C-Tick

Network Management

System OS Support

Windows 2000/XP

Standard Accessories

25M RJ45 Cable

2M RJ45 Cable

Bracket

DC Injector

NetComm NP730

802.11b/g Wireless Outdoor Access Point

NP730 Wireless Outdoor Access Point

The NetComm NP730 is an outdoor device that will operate in access point, repeater and bridge mode. Designed to meet the needs of today’s most demanding wireless LAN deployments, the NetComm NP730 offers a 5DBI antenna with a 200mw inbuilt booster to enhance wireless network coverage. The NP730 offers a solution to create a reliable and scalable wireless network through its multi mode set up the device can be used in many instances to increase and enhance wireless coverage.

Operating in the 802.11g wireless spectrum the device provides 54mpbs wireless coverage and is backwards compatible to 802.11b. Whether you are needing to increase wireless connectivity within an office, warehouse, shop or to extend the range on the NetComm HS960 wireless hotspot or if you are looking to increase outdoor coverage, each external access point offers simple installation and a simple way to increase your coverage.

Wireless Device

 

 

NP730

(Router/Modem

POE Injector

Access Point

Router/Hotspot)

 

Power Point

Please note: This cable is part of the NP730 unit

Included accessories:

25M RJ45 Cable

2M RJ45 Cable

Bracket

DC Injector

Your NetComm dealer:

NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia

P:02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.

Page 2
Image 2
NetComm NP730 manual Standards Compliance, Flash, Radio Frequency Type, Modulation, Frequency Band, Transmission Power