NETGEAR 150 manual Package Contents, Connect your modem, Connect your computer, Step, WNR612v2

WNR612v2_IG_14Jan10.fm Page 1 Thursday, January 14, 2010 7:31 AM

Installation Guide

Wireless-N 150 Router

WNR612v2

Package Contents:

Step 1:	Step 2:
Connect your modem.	Attach stand to the router,
	then connect your router.

Step 3:

Connect your computer.

Power/Test LED

Wireless LED

Internet LED

LAN Ports 1 & 2 LEDs

(not included)

CAUTION:

MAKE SURE YOUR MODEM IS

TURNED OFF OR UNPLUGGED

BEFORE STARTING THE

INSTALLATION.

(not included)

Ethernet cable

Wireless-N 150 Router

(back)

Laptop or Desktop

Computer

DSL or Cable

Modem

Power

Adapter

Wireless-N 150 Router with Stand(front)

Ethernet Cable Power Adapter

Step 4:

Power on your modem.

Wait until your modem cycles on (approximately 2 minutes).

Note: If you have a battery-backed modem, press the reset button. In some cases, you may need to remove, then re-insert, the battery to recycle your modem.

Step 5:

Power on your router.

Wait until the power/test

LED turns solid green.

Step 6:

Configure settings.

Open a browser, such as Internet Explorer, and enter www.routerlogin.net

to complete the setup.