NETGEAR ANT24D18v2 manual Introduction

Introduction

Thank you for purchasing the NETGEAR ANT24D18v2 antenna. This Installation Guide provides installing instructions and guidelines for using the NETGEAR 14 dBi Patch Panel Directional Antenna.

Package Contents

Reverse N/SMA adapter

Installation Guide, Warranty and	14 dBi Patch Panel Directional	2-meter cable
	Lightning
Support information card	Antenna ANT24D18v2
	arrestor

Screws, angle adj screws, screw nuts, washer,	Sticker and waterproof tape	3 brackets for adjustable positioning, and 2 U-bolts
plastic fixings,

The package should contain the following items:

NETGEAR Indoor/Outdoor 14 dBi 2.4 ~ 2.5 GHz

Patch Panel Directio nal Anten na ANT24 D18v2

2-meter low loss antenna cable to connect the antenna to a lightning arrestor Lightning Arrestor

Note: a ground cable is not included but required for outdoor installation. The grounding

cable must be equivalent or better than: AWG 10, UL 1015, Stranded, 600 V, 105C, green or green/yellow insulation, 2 clip of 5.5 mm inner diameter cramped at both ends, cable no longer than 5 meters.

Reverse N/SMA Adapter

1